The 316 Stainless Steel range of flow turbines is designed specifically for the sub-sea engineering market. Working on the well proven turbine principle, the flow of liquid acts against the angled surfaces of a set of precision turbine blades causing them to rotate. The movement of the tip of each blade is detected by a sensor located in the body of the meter. This is then converted in to a pulsed signal, the frequency of which is proportional to the flow rate through the meter.

Available for use on flow rates from 1 L/min up to 9000 L/min and suitable for use at depths of up to 4000 meters, these meters are manufactured with your choice of flanged connection. The output signal is available as either an amplified square wave pulse or 2 wire 4-20mA analogue signal. The signal convertors are fully potted and sealed and can be fitted with either a flying lead or a Seacon sub sea connector. Each turbine is supplied with its own individual calibration certificate.