|
The RE4 range of flow turbines are designed specifically for the hydraulics market. Working on the well proven turbine principle, the flow of liquid acts against the angled surfaces of a set of precision turbine blades causing them to rotate. The movement of the tip of each blade is detected by a sensor located in the body of the meter. This is then converted in to a pulsed signal, the frequency of which is proportional to the flow rate through the meter. |
The RE4 series turbines have long internal flow straighteners on both the inlet and outlet sides of the meter resulting in an exceptionally accurate and reliable reading. The RE4 series is also equipped as standard with test points for pressure and temperature sensors enabling all three major parameters to be monitored from one small compact unit.
A high pressure rating of 400 bar and temperature rating of 120°C make this unit perfect for the hydraulics industry. Available in 4 sizes from 1 L/min up to 600 L/min, ensuresmeans there is a unit to meet your requirements.
A full range of electronic data loggers and panel mounted displays are available to accompany the RE4 turbines. Please have a look at the above links.
