Hydraulic Motor Testing
Hydrotechnik UK designed and custom built a hydraulic testing rig capable of testing the efficiency of a wide range of hydraulic motors commonly fitted onto forklifts and other hydraulic machinery. Having built up a loyal customer base over the past 20 years repairing and re-selling motors KPEC wanted to improve their testing facilities to continue to provide a top class service. KPEC required their motors to go through extensive testing under specific conditions to understand the performance of the refurbished motor. Testing Specification KPEC required a user-operated testing system with variable flows up to 100 litres per minute through the motor at a maximum settable pressure of 300 bar with a torque load of up to 1100Nm.
During the test the user needs to be able to control the direction, both clockwise or anti-clockwise, the flow rate, loading pressure, temperature and system pressure.
On top of this, monitor the status need to be read in real time on the control panel with seven accurately individual displays.
• Motor Torque
• Case drain flow
• System Flow Rate
• Motor Speed
• Loading Pressure
• System Pressure
• System Oil Temperature
Building the testing system – the power of three
With Hydrotechnik UK 25 year’s of experience and deep understanding of pressure measurement, flow, rpm, torque and temperature, measuring and recording.
A variety of pump accessories were supplied from Hydrotechnik’s sister company UK Flowtechnik, such as bellhousings, damping elements, foot brackets to improve the noise levels, oil cooler to keep systems running smoothly and spider couplings all helping to sustain the life of the pump and test piece.
Hydrotechnik UK sourced two pumps for the system and loading side, x2 custom built Bosch Rexroth piston pump with an internal proportional control for the loading side and for the system.
In order to protect against the motors degradation during testing, through the natural build-up of particulate contamination, we fitted 14” Schroeder filters for offline, pressure and return line filters, to remove particulate contamination down to 3µm absolute filtration.
For peace of mind indication lights inform the user when the filters become blocked and require changing and a light to indicate the overall health of the system. Also fitted was VF60 high pressure inline filter to catch any contamination whilst carrying out the test.
Running the test
We carry out demonstration tests on the test peices for each of our test rigs under the required conditions and specification requested from the customer in this case KPEC.
In-house tests were carried out to test the performance of a hydraulic motor at 43 litres/minute at 34.3 bar system pressure at 132 RPM. Hydrotechnik UK successfully installed the test rig on-site and carried out testing to the customers specification.
From the test results we can see that the MultiSystem5060Plus datalogger captured all the key data required from six channels, the system pressure, loading pressure, main temperature, motor speed, torque and system flow. This performance data could be downloaded onto our HYDROCOM6 software for further analysis.
For each of our test rigs that we design and build we provide a full technical brief, design the rig with the latest 3D CAD system and built to ISO 9001 standards to the highest engineering standards. We also provide training for all test rig users so they can carry out the tests unaided.
Hydrotechnik UK have helped many component manufacturers of valves, motors, pumps, hoses and cylinders, carry out component sign off tests. To discover more about our recent installations please view our other case studies.