High temperature Flowmeter

Enables flow monitoring of barrel heating fluids, thermal transfer fluids through heat exchangers, as well as flows through hydraulic circuits and sub-circuits with elevated temps.

Choice of three materials of construction: Select from aluminum, brass or stainless steel to meet system requirements.
Unrestricted mounting: Allows the designer to install the meter in any orientation – horizontal, vertical or inverted.
Good viscosity stability: A sharp-edged stainless steel orifice provides excellent measurement stability for viscosities ranging from 0-500 SSU.
Rugged & realiable: Designed as a hydraulic service tool, this meter will provide years of maintenance-free performance.
High pressure operation: The magnetically-coupled follower design allows operation to 6000 PSIG and use with opaque liquids.
24 different ports available: Standard selection of NPT, SAE and BSP ports reduces the amount of adapters required for installation.
Low cost accuracy: ± 2.5% of range accuracy in center third of scale; ±4% in upper and lower thirds.

Engineering specifications:

The high temperature in-line flow meter shall:

• Use the variable annular orifice technique with compression spring recoil
• Not require inlet or outlet straight plumbing, or require vertical pipe mounting
• Have a measuring accuracy of ±2.5% of full scale in the center third of the measuring range, and ±4% in upper and lower thirds
• Have a stainless steel sharp-edged orifice
• Have a maximum temperature rating of: H-series 400°F (204°C) or J-series 600°F (315°C)
• Have a working pressure rating of 3500 PSIG