The original and still the market leader, MINIMESS® pressure test points offer the most advanced sealing system available. A lifetime leak free guarantee and suitability for almost any fluid or gas makes Minimess® the natural choice to specify.
A user list throughout the world reads as a Who’s Who of industry from mobile plant to steel and gas production. Minimess® 1215 test points are suitable for applications where a smaller test point connection size is needed. Minimess® 1215 are the best for GAS applications and are available in brass.
Other applications include: hydraulic and other oils on mineral oil basis plus water and other fluids.
Minimess® 1215 test point ordering codes
| Thread | Sealing Form | Max pressure Bar | Height (mm) |
i (mm) |
SW (mm) |
Zinc Nickel Plated 1.0718 Carbon Steel Part Number |
Stainless Steel 1.4571 316Ti Stainless Steel Part Number |
|---|---|---|---|---|---|---|---|
| M 8 x 1 | Form G | 250 | 30 | 8.5 | 14 | 2101-06-32.00 | On Request |
| M 10 x 1 | Form G | 630 | 30 | 8.5 | 14 | 2101-06-33.00 | 2701-06-33.10 |
| M 12 x 1.5 | Form F | 630 | 29 | 10 | 17 | 2101-06-13.00 | On Request |
| M 14 x 1.5 | Form F | 630 | 29 | 10 | 19 | 2101-06-14.00 | On Request |
| IS0 228-G 1/8 | Form F | 400 | 30 | 8 | 14 | 2101-06-17.00 | On Request |
| ISO 228-G 1/4 | Form F | 630 | 29 | 10 | 19 | 2101-06-18.00 | 2701-06-18.10 |
| 1/8 NPTF | Form H | 400 | 26 | 12 | 14 | 2101-06-46.00 | On Request |
| 1/4 NPTF | Form H | 630 | 26 | 15 | 14 | 2101-06-47.00 | 2701-06-47.10 |
| 7/16-20 UNF | Form E | 630 | 29 | 9 | 17 | 2101-06-21.00 | On Request |
| 9/16-18 UNF | Form E | 630 | 28 | 10 | 19 | 2101-06-53.00 | On Request |
| ISO 7/l-R 1/8 | Form C | 400 | 26 | 12 | 14 | 2101-06-40.00 | On Request |
Further information:
Sealant information - Internal primary and secondary sealing and sealing for screw-in thread made of NBR(Buna N). Option: in FKM (Viton)
- Applications with plastic cap (standard) & for both sealing materials:- 20°C to +100°C
- Applications with metal cap & sealings out of NBR (Buna N):- 25°C to + 100°C
- Applications with metal cap & sealings out of FKM (Viton) option: -20°C to +200°C
Plastic cap also available on request
For Viton seals replace .00 with .10 (other seals e.g. EPDM available on request)
Contact Us
- Freephone0800 068 4134
- Phone+44(0)1159 003550
- Emailsales@hydrotechnik.co.uk
Test points