Minimess® 1620 Test Point

Minimess 1620 Male Threaded Test Point
Manufactured bylogo

Minimess® 1620 test points (also known as Test 20) have a unique M16x2 threaded test connection. This is the most common test point used today and is available in a wide variety of connection threads, body materials & sealing options.

All Minimess® test points carry a lifetime leak free guarantee for all compatible fluids. For permanent use with gases, please visit our Minimess® Gas Charging Valves section.

Minimess® test points offer a uniquely simple method of accessing low or high pressure systems for the purpose of pressure testing, oil sampling or gas charging. A wide range of industries use Minimess® as their pressure test point of choice, from mobile plant to steel and gas production. The Minimess® test points are manufactured in steel, stainless steel, brass or monel with buna nitrile, viton or EPDM sealing options.

Minimess® 1620 test point ordering codes

  Thread Sealing Form Torque
(Nm)

 Max Pressure     (Bar)

 Height
(mm)

Thread Length (mm)

 Free Cutting Steel
1.0718
Carbon Steel Part Number		 Stainless Steel
1.4571
316TI Stainless Steel Part Number
M8x1 Form G 6 250 41 8.5 2103-01-32.00N On Request
M10x1 Form E 20 630 37.5 9.5 2103-01-94.00N On Request
M10x1 Form F 20 400 37.6 8 2103-01-12.00N 2703-01-12.10
M10x1 Form G 15 630 37.5 8.5 2103-01-33.00N 2703-01-33.10
M12x1.5 Form B 45 630 36 10 2103-01-48.00N On Request
M12x1.5 Form E 35 630 35.1 11 2103-01-95.00N On Request
M12x1.5 Form F 45 630 36 10 2103-01-13.00N 2703-01-13.10
M14x1.5 Form B 60 630 36 10 2103-01-49.00N On Request
M14x1.5 Form E 45 630 35.5 11 2103-01-96.00N On Request
M14x1.5 Form F 60 630 36 10 2103-01-14.00N 2703-01-14.10
M16x1.5 Form F 80 630 36 10 2103-01-15.00N On Request
               
IS0228-G1/8" Form F 20 400 38 8 2103-01-17.00N 2703-01-17.10
ISO228-G1/4" Form B 60 630 36 10 2103-01-51.00N On Request
1/4"BSP 60° cone 40 630 36 10 2103-01-51.CN On Request
ISO228-G1/4" Form F 60 630 36 10 2103-01-18.00N 2703-01-18.10
ISO228-G3/8" Form F 90 400 36 10 2103-01-16.00N 2703-01-16.10
               
1/8"NPTF Form H - 400 33 9.5 2103-01-46.00N On Request
1/4"NPTF Form H - 630 33 16.5 2103-01-47.00N 2703-01-47.10
               
7/16"-20UNF Form E 20  630 37 11 2103-01-B5.00N 2703-01-B5.10
9/16"-18UNF Form E 35 630 36 12 2103-01-B6.00N 2703-01-B6.10
               
ISO 7/I-R1/8" Form C - 400 33 13 2103-01-40.00N On Request
ISO 7/I-R1/4" Form C - 630 33 13 2103-01-41.00N 2703-01-41.10

Plastic cap also available on request.
For Viton (FKM) seals, replace .00 with .10. (Other seals, e.g. EPDM, available on request).

  • Applications with plastic cap (standard) & for both sealing materials:- 20°C to +100°C
  • Applications with metal cap & sealings out of NBR (Buna Nitrile):- 25°C to + 100°C
  • Applications with metal cap & sealings out of FKM (Viton) option: -20°C to +200°C

Downloads

Original Minimess® Pressure Test Points & Adaptors

Contact Us

Test points