Nitrogen accumulator charging kit for charging or pressure checking with Hydac style M28x1.5 female threaded accumulator valves, with a hexagon valve key. 400 bar maximum pressure (limited by charging device) with Hydrotechnik Minimess® test or charging points and charging hose.
- Valve body complete with M28x1.5 female ring nut connection to accumulator gas valve, bleed and Minimess® charging hose connection.
- Additional accumulator charging valve adaptors to 5/8" UNF female, 7/8" UNF female (long & short thread), 5/16" UNEF (VG8) female (long & short thread), 1/4" BSP female & Minimess® 1615 or 1620 female
- 2.5m long high-pressure flexible microbore hose complete with Minimess® connections
- Two pressure gauges (60 bar and 250 bar)
- 5/8" BSP male adaptor to connect to nitrogen bottle with Minimess® charging hose connection
- Set of spare gaskets
- Carrying case
Measuring Kit Part Code
PCFPU-XXX-Y-Z-A
Pressure Gauges
(full scale range in Bar) |
*Replace XXX with |
---|
250 & 60 bar
(standard) |
280/70 |
400 bar |
400 |
100 bar |
100 |
40 bar |
40 |
10 bar |
10 |
Other ranges available on request.
Connection to Nitrogen Bottle |
*Replace Z with |
---|
5/8" BSP male
(standard) |
X |
W24,32x1/14" female |
W |
W21,7x1/14" female |
M |
CGA580 male |
A |
W30x2 Nevoc female |
N |
Other country Nitrogen bottle adaptors on request.
Connection to Nitrogen Bottle |
*Replace A with |
---|
2.5m (standard) |
2.5 |
5m |
5 |
10m |
10 |
Other lengths available on request.
Further information
To get the most out of our range of accumulator charging and testing kits we have written the following articles.