Series 7000 Torque Sensor

  • Series 7000 torque sensor
The series 7000 is extremely robust and reliable torque measurement sensor for 3000 or 5000 Nm at up to 3,600 rpm. It also includes the option to add a speed or angle measurement.

This series is mainly used in test facilities, automotive engineering, agriculture machinery/off-highway applications, process monitoring and quality control.

Transmitted torque can be measured statically and dynamically in real time. Additional to the flange system it is possible to order a variety of different shafts and bushes as accessories such as PTO. Each sensor can be configured individually with a lot of extras, such as angle sensor, speed sensor and protection class IP65.

Series 7000 offers a wide range of output signals such as 0-10 V, 4-20 mA, CAN-Bus or USB. USB is offered including a special software to show data in real time. Hydrotechnik also offer a large range of multi channel data logging instruments.

The sensor is provided as a complete unit with integrated evaluation electronic, including 5m cable and calibration certificate.

Technical data

  • Measuring range in Nm (+/-): 3.000; 5.000
  • Rotational speed: ≤ 3.600 rpm
  • Accuracy: ≤ ±0,5 %
  • Temperature range: -40 °C to +85 °C
  • Protection class: IP50, IP65
  • Output signals: 0-10 V/4-20 mA/CAN-Bus/USB
  • Output frequency: 2.500 Hz

Your advantages

  • Made in Germany (nearby Munich, Bavaria)
  • Fast availability
  • Best price-performance ratio
  • Integrated electronic (Plug & Play)
  • Contactless measurement system
  • Including 5 m cable and calibration certificate

Order Code

7000-XXXX-A-B-C-D-E-F-G
Measurement range *Replace XXXX with
Nm including 5 m cable and calibration certificate 3.000
Nm including 5 m cable and calibration certificate 5.000
Selectable up to 5.000 Nm including 5 m cable and calibration certificate XXXX
1st Shaft end *Replace A with
NCTE-Flange (bolt circle 138 mm with 8 x M12) 0
Customised X
2nd shaft end *Replace B with
NCTE-Flange (bolt circle 138 mm with 8 x M12) 0
Customised X
Angle or Speed sensor *Replace C with
Without angle sensor 0
Angle sensor 360CPR (only with IP50) 1
Speed sensor 1CPR 2
Speed sensor 60CPR 3
Analogue output *Replace D with
Voltage output 0-10 V A
Current output 4-20 mA S
Digital output (optional) *Replace E with
USB incl. NCTE Software and 2,8 m cable U
CAN-Bus (not with angle sensor) C
Inverted output signal *Replace F with
All output signals inverted I
Protection class according to EN 60529 *Replace G with
IP50 0
IP65 (not with angle sensor) 1
Contact Us

Get in touch...

Downloads

Pressure, Temperature, Flow, RPM, Vibration, Force, Torque & Position Sensors for Hydrotechnik Test Equipment