This series is mainly used in test facilities, automotive engineering, agriculture machinery/off-highway applications, process monitoring and quality control.
Transmitted torque can be measured statically and dynamically in real time. Additional to the flange system it is possible to order a variety of different shafts and bushes as accessories such as PTO. Each sensor can be configured individually with a lot of extras, such as angle sensor, speed sensor and protection class IP65.
Series 7000 offers a wide range of output signals such as 0-10 V, 4-20 mA, CAN-Bus or USB. USB is offered including a special software to show data in real time. Hydrotechnik also offer a large range of multi channel data logging instruments.
The sensor is provided as a complete unit with integrated evaluation electronic, including 5m cable and calibration certificate.
Technical data
- Measuring range in Nm (+/-): 3.000; 5.000
- Rotational speed: ≤ 3.600 rpm
- Accuracy: ≤ ±0,5 %
- Temperature range: -40 °C to +85 °C
- Protection class: IP50, IP65
- Output signals: 0-10 V/4-20 mA/CAN-Bus/USB
- Output frequency: 2.500 Hz
Your advantages
- Made in Germany (nearby Munich, Bavaria)
- Fast availability
- Best price-performance ratio
- Integrated electronic (Plug & Play)
- Contactless measurement system
- Including 5 m cable and calibration certificate
Order Code
Measurement range | *Replace XXXX with |
---|---|
Nm including 5 m cable and calibration certificate | |
Nm including 5 m cable and calibration certificate | |
Selectable up to 5.000 Nm including 5 m cable and calibration certificate | |
1st Shaft end | *Replace A with |
NCTE-Flange (bolt circle 138 mm with 8 x M12) | |
Customised | |
2nd shaft end | *Replace B with |
NCTE-Flange (bolt circle 138 mm with 8 x M12) | |
Customised | |
Angle or Speed sensor | *Replace C with |
Without angle sensor | |
Angle sensor 360CPR (only with IP50) | |
Speed sensor 1CPR | |
Speed sensor 60CPR | |
Analogue output | *Replace D with |
Voltage output 0-10 V | |
Current output 4-20 mA | |
Digital output (optional) | *Replace E with |
USB incl. NCTE Software and 2,8 m cable | |
CAN-Bus (not with angle sensor) | |
Inverted output signal | *Replace F with |
All output signals inverted | |
Protection class according to EN 60529 | *Replace G with |
IP50 | |
IP65 (not with angle sensor) |