The Universal nitrogen accumulator charging kit with a pressure regulator is designed for charging a wide selection of accumulator types with nitrogen or to check or reduce existing pre-charge pressure in accumulators. The kit has a vast quantity of adaptors for piston, bladder, and diaphragm accumulators and comes with a high-quality pressure regulator for setting charge pressures, making it the ultimate tool for service professionals.
Features
- Safe & easy to use Minimess® charging & testing connections
- Allows connection to most common accumulators
- Minimess 1615 or 1620 accumulator connections
- M28x1.5 female accumulator connection with additional 5/8" - 18 UNF, VG8 (Schrader style), 7/8" - 14 UNF and 1/4" BSP adaptors
- High-quality bottle pressure regulator for setting charge pressures from 10 to 200 bar
Kit contents
- 1 x GPS-420 series nitrogen pressure regulator with 5/8" BSP male UK bottle connection. 10...200 bar settable pressure range.
- 1x PCFPU accumulator charging device with M28x 1.5 female to Minimess® 1620 microbore hose connection with manual bleed valve.
- Minimess® 1620 to 5/8" BSP male UK bottle connection
- (if regulator not required).
- 60 bar analogue gauge with safety blowout flap (for PCFPU device).
- 250 bar analogue gauge with safety blowout flap (for PCFPU device).
- 1 x 5/8" - 18 UNF male to VG8 female (schrader style) short thread.
- 1 x 5/8" - 18 UNF male to VG8 female (schrader style) long thread.
- M28 x 1.5 male to 5/8" UNF female master adaptor for PCFPU device
- 1 x 5/8" - 18 UNF male to 7/8" - 14 UNF female long (with pin).
- 1 x 5/8" - 18 UNF male to 7/8" - 14 UNF female short (without pin).
- 1 x 5/8" - 18 UNF male to 1/4" BSP female (with pin).
- Set of spare seals.
- 1 x Minimess 1615 to Minimess 1620 (with check valve) microbore charging & testing hose - 2.5 metre long*
- 1 x Minimess 1615 to Minimess 1615 (with check valve) microbore charging & testing hose - 2.5 metre long*
*Any hose lengths available upon request.
