The 2300 series is the most cost-effective entry into professional torque measurement technology. This series is mainly used in automotive test facilities, professional testing construction, climatic exposure test cabinets (exceeding dew point), process monitoring and medical engineering. Transmitted torque can be measured statically and dynamically in real time. Shaft is available as Round shaft and Square shaft. Each sensor can be configured individually with a lot of extras, such as angle sensor. Series 2300 offers a wide range of output signals such as 0-10 V, 4-20 mA, CAN-Bus or USB. USB is offered including a special software which enables to show data in real time. The sensor is provided as a complete unit with integrated evaluation electronic, including 5 m cable, keystones (Round shaft) and calibration certificate.
Advantages
- Made in Germany (nearby Munich, Bavaria)
- Delivery ex warehouse (< two weeks)
- Best price-performance ratio
- Integrated electronic (Plug & Play)
- Contactless measurement system
- Including 5m cable and calibration certificate
Technical Data
- Accuracy: < +/-0.5%
- Rotational speed: ≤ 10.000 rpm
- Temperature range: -30°C to +85°C
- Protection class: IP50
- Output signals: 0-10 V/4-20 mA/CAN-Bus/USB
- Output frequency: 1000 Hz
Order Codes
Replace XX, A, B, C, D and E using the options in the following table.
All options include 5m cable and calibration certificate.
| Order Option | Replaced Letter | Options | Description |
|---|---|---|---|
| Measuring range | 2300--A-B-C-D-E | Nm | |
| Angle sensor | 2300-XX--B-C-D-E | Without angle sensor | |
| Angle sensor 360CPR | |||
| Analog output | 2300-XX-A--C-D-E | None (leave blank) | |
| Voltage output 0...10V | |||
| Current output 4...20mA | |||
| Digital output | 2300-XX-A-B--D-E | None (leave blank) | |
| USB inc. NCTE Software and 2.8m cable |
|||
| CAN-Bus | |||
| Shaft ends | 2300-XX-A-B-C--E | Round shaft with keystone | |
| Square shaft | |||
| Protection class according to EN 60529 |
2300-XX-A-B-C-D- | IP50 |